United willy PVC floor production process

1. Mixing:
PVC powder, plasticizers, stabilizers, lubricants, fillers and other raw materials in a certain order feed mix.
2. mixing:
The material uniformly mixed into internal mixer mixing.
3. mill:
Semi-finished rolled into a sheet, that this process of production of the intermediate layer at the bottom of the material.
The fabric and transparent material cutting:
The desired production process transparent wear layer, decorative layer printed according to product size to crop.
5. Shop mode:
Depending on the product mix formula, according to customer requirements color standard operating norms laid neatly placed and overlapped.
6. Hydraulic:
After hot pressing, the product relatively firmly bonded between layers.
7. Laminating:
According to customer requirements, the semi-finished products by hot pressing PU coating is cured after treatment, the product wear-free polishing wax, convenient and easy to clean effect.
8. Tempering:
After the product by hot pressing products are not stabilized by heat treatment product has good stability properties.
9. Health:
That is left to stand, the key step in this process for the product to completely eliminate stress, is the rear of the semi-finished product is placed in a thermostatic chamber tempering cooling, standing, so that each semi-finished products only after forming a more uniform temperature.
10. Forming:
According to customer requirements, different specifications of the products can be shaped, long products, such as the shape of the box, can meet customer needs.
11. chamfering / cut a groove:
According to customer requirements, chamfered, product imitation wood carved ditch after / marble / granite lines more realistic.
12. goods seized:
This step is a step on the road to production of goods for the seizure, final product inspection, confirmed the main test appearance, quantity and so on. 13. Packaging
Packaging products, shipped to the customer.